manFSF France machines management - Cookbook: recipe #331, Networking configuration specific...

 
 
Show feedback again

recipe #331, HowTo: Networking configuration specific to Z2 nodes installed at rennes

On the gateway

If 10.10.1.130 is the IP of a new VM and 10.10.0.2 is the primary node on which it resides, on the firewall that NAT to the net all packets comming from 10.10.0.2, do the following:

and restart shorewall.

On the node

To have 10.10.11.0/24 directly routed on eth0 instead of using the route propagated by ospf (z2-5 -> openvpn.fsf -> rennes.tld etc ...).
The idea is to filter the kernel routes :

We do not want to propagate the default route, and the 10.10.10/11 networks, so we will only allows :

In /etc/quagga/ospfd.conf, after the 2 "network" entries :

Then restart quagga.

Last update: Thu 14 Oct 2010 04:44:17 PM UTC

 

 

 

 

 

Audience and Context

Audience:
   All Project Members
Feature:
   Project Main Pages

(As there is at least one of the Audience/Feature/Action context information not set, this recipe will not show up in related recipes links)

Show feedback again

Back to the top


Powered by Savane 3.1-cleanup